MACX MCR-EX-SL-RPSSI-2I-SP

https://www.phoenixcontact.com/us/products/2924236 Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-SP - 2924236 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ex i measuring transducer power supply and input isolating amplifier, HART. Transfers supplied or active 0/4 20 mA electrically isolated signals from the Ex area to two loads in the safe area. 4-way electrical isolation, SIL 2 according to IEC 61508, push-in Technology. Product description Repeater power supply and input isolating amplifier for the operation of intrinsically safe (Ex-i) 2-wire measuring transducers, 4-wire measuring transducers, and mA current sources installed in Ex areas. – 0/4 ... 20 mA, [Ex ia] IIC input (powered or not powered) – Two electrically isolated 0/4 ... 20 mA (active) outputs - Bidirectional transmission of digital HART communication signals (both outputs) – Plug-in screw or spring-cage connection method, with integrated sockets for HART communicators - 4-way electrical isolation - Energy can be supplied via DIN rail connector - Up to SIL 2 according to EN 61508 - Installation in zone 2, protection type "n" (EN 60079-15) permitted   Product Features  Power supply possible via DIN rail connector  Up to SIL 2 according to EN 61508  Installation in zone 2, protection type "n" (EN 60079-15) permitted  0/4 ... 20 mA input, [Ex ia] IIC (powered or not powered)  Two electrically isolated 0/4 ... 20 mA (active) outputs  Bidirectional transmission of digital HART communication signals (both outputs)  Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators  4-way electrical isolation           Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 160.0 GRM Custom tariff number 85437090 Country of origin Germany 10/10/2014   Page 1 / 7 https://www.phoenixcontact.com/us/products/2924236 Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-SP - 2924236 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position) Ambient temperature (storage/transport) -40 °C ... 80 °C Maximum altitude ≤ 2000 m Permissible humidity (operation) 10 % ... 95 % (non-condensing) Degree of protection IP20 Input data Signal input Repeater power supply operation Current input signal 4 mA ... 20 mA Transmitter supply voltage > 16 V (at 20 mA) > 15.1 V (at 23 mA) Signal input Signal conditioner operation Current input signal 0 A ... 20 mA 4 mA ... 20 mA Voltage drop approx. 3.9 V Output data Signal output Repeater power supply operation Current output signal 4 mA ... 20 mA (active) Load/output load current output < 450 Ω (at 20 mA) < 380 Ω (at 23 mA) Output ripple < 20 mVrms Output behavior in the event of an error 0 mA (Cable break in the input) ≥ 23 mA (Cable short-circuit in the input) Signal output Signal conditioner operation Current output signal 0 mA ... 20 mA (active) 4 mA ... 20 mA (active) Load/output load current output < 450 Ω (at 20 mA) < 380 Ω (at 23 mA) Output ripple < 20 mVrms 10/10/2014   Page 2 / 7 https://www.phoenixcontact.com/us/products/2924236 Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-SP - 2924236 Technical data Output data Output behavior in the event of an error 0 mA (Cable break in the input) 0 mA (Cable short-circuit in the input) Power supply Supply voltage range 19.2 V DC ... 30 V DC (24 V DC (-20% ... +25%)) Max. current consumption < 75 mA (24 V DC/ 20 mA) Power consumption < 1.45 W (24 V DC/ 20 mA) Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 1.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 16 Stripping length 8 mm Connection method Spring-cage connection General Maximum transmission error < 0.1 % (of final value) Transmission error, typical < 0.05 % (of final value) Maximum temperature coefficient < 0.01 %/K Step response (10-90%) < 600 µs (for 4 mA ... 20 mA step) Status display Green LED (PWR supply voltage) Inflammability class according to UL 94 V0 Housing material PA 66-FR Color green Designation Input/output/power supply Electrical isolation 300 Vrms (Rated insulation voltage (surge voltage category II; pollution degree 2, safe isolation as per EN 61010-1)) 2.5 kV (50 Hz, 1 min., test voltage) Designation Input/output Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Designation Input/power supply Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Designation Output 1/output 2 Electrical isolation 1.5 kV AC (50 Hz, 1 min., test voltage) Conformance CE-compliant, additionally EN 61326 ATEX  II (1) G [Ex ia Ga] IIC/IIB 10/10/2014   Page 3 / 7 https://www.phoenixcontact.com/us/products/2924236 Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-SP - 2924236 Technical data General  II (1) D [Ex ia Da] IIIC  II 3 (1) G Ex nA [ia Ga] IIC/IIB T4 Gc IECEx [Ex ia Ga] IIC/IIB [Ex ia Da] IIIC Ex nA [ia Ga] IIC/IIB T4 Gc Functional Safety (SIL) SIL 2 according to EN 61508 Data communication (bypass) HART function Yes Protocols supported HART Safety data Operation Repeater power supply operation Max. output voltage Uo 25.2 V Max. output current Io 93 mA Max. output power Po 587 mW Group IIC Max. external inductivity Lo 2 mH Max. external capacity Co 107 nF Group IIB Max. external inductivity Lo 4 mH Max. external capacity Co 820 nF Safety-related maximum voltage Um 253 V AC (125 V DC) Operation Signal conditioner operation Input voltage Ui ≤ 30 V Input current Ii ≤ 150 mA Max. internal inductance Li negligible Max. internal capacitance Ci negligible Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 eCl@ss 7.0 27210120 10/10/2014   Page 4 / 7 https://www.phoenixcontact.com/us/products/2924236 Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-SP - 2924236 Classifications eCl@ss eCl@ss 8.0 27210120 ETIM ETIM 2.0 EC001485 ETIM 3.0 EC001485 ETIM 4.0 EC001485 ETIM 5.0 EC002653 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals Functional Safety / UL Listed / cUL Listed / cUL Listed / cULus Listed / cULus Listed / cULus Listed / null / null / null / null Ex Approvals IECEx / ATEX Approvals submitted Approval details Functional Safety  UL Listed  10/10/2014   Page 5 / 7 https://www.phoenixcontact.com/us/products/2924236 Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-SP - 2924236 Approvals cUL Listed  cUL Listed  cULus Listed  cULus Listed  cULus Listed          Drawings 10/10/2014   Page 6 / 7 https://www.phoenixcontact.com/us/products/2924236 Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-SP - 2924236 Block diagram OUT IN Sensor / Field PLC / DCS AI passive 4.2 - 4.2 4.1 + 3.2 3.2 OUT 1 4.1 3.1 or 3.1 + 2.2 passive OUT 2 2.1 5.2 - 5.2 5.1 + GND 5.1 +24V 1.2 2.2 2.1 + 1.1 Power GND +24V Zone 0,1,2 Zone 20,21,22 Zone 2 Div. 1,2 Div. 2 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 7 / 7